install netifaces

lib/python3.5/site-packages/netifaces-0.10.4.dist-info/DESCRIPTION.rst

@@ -0,0 +1,196 @@
+netifaces 0.10.4
+================
+
+.. image:: https://drone.io/bitbucket.org/al45tair/netifaces/status.png
+   :target: https://drone.io/bitbucket.org/al45tair/netifaces/latest
+   :alt: Build Status
+
+1. What is this?
+----------------
+
+It's been annoying me for some time that there's no easy way to get the
+address(es) of the machine's network interfaces from Python.  There is
+a good reason for this difficulty, which is that it is virtually impossible
+to do so in a portable manner.  However, it seems to me that there should
+be a package you can easy_install that will take care of working out the
+details of doing so on the machine you're using, then you can get on with
+writing Python code without concerning yourself with the nitty gritty of
+system-dependent low-level networking APIs.
+
+This package attempts to solve that problem.
+
+2. How do I use it?
+-------------------
+
+First you need to install it, which you can do by typing::
+
+  tar xvzf netifaces-0.10.4.tar.gz
+  cd netifaces-0.10.4
+  python setup.py install
+
+Once that's done, you'll need to start Python and do something like the
+following::
+
+>>> import netifaces
+
+Then if you enter
+
+>>> netifaces.interfaces()
+['lo0', 'gif0', 'stf0', 'en0', 'en1', 'fw0']
+
+you'll see the list of interface identifiers for your machine.
+
+You can ask for the addresses of a particular interface by doing
+
+>>> netifaces.ifaddresses('lo0')
+{18: [{'addr': ''}], 2: [{'peer': '127.0.0.1', 'netmask': '255.0.0.0', 'addr': '127.0.0.1'}], 30: [{'peer': '::1', 'netmask': 'ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff', 'addr': '::1'}, {'peer': '', 'netmask': 'ffff:ffff:ffff:ffff::', 'addr': 'fe80::1%lo0'}]}
+
+Hmmmm.  That result looks a bit cryptic; let's break it apart and explain
+what each piece means.  It returned a dictionary, so let's look there first::
+
+  { 18: [...], 2: [...], 30: [...] }
+
+Each of the numbers refers to a particular address family.  In this case, we
+have three address families listed; on my system, 18 is ``AF_LINK`` (which means
+the link layer interface, e.g. Ethernet), 2 is ``AF_INET`` (normal Internet
+addresses), and 30 is ``AF_INET6`` (IPv6).
+
+But wait!  Don't use these numbers in your code.  The numeric values here are
+system dependent; fortunately, I thought of that when writing netifaces, so
+the module declares a range of values that you might need.  e.g.
+
+>>> netifaces.AF_LINK
+18
+
+Again, on your system, the number may be different.
+
+So, what we've established is that the dictionary that's returned has one
+entry for each address family for which this interface has an address.  Let's
+take a look at the ``AF_INET`` addresses now:
+
+>>> addrs = netifaces.ifaddresses('lo0')
+>>> addrs[netifaces.AF_INET]
+[{'peer': '127.0.0.1', 'netmask': '255.0.0.0', 'addr': '127.0.0.1'}]
+
+You might be wondering why this value is a list.  The reason is that it's
+possible for an interface to have more than one address, even within the
+same family.  I'll say that again: *you can have more than one address of
+the same type associated with each interface*.
+
+*Asking for "the" address of a particular interface doesn't make sense.*
+
+Right, so, we can see that this particular interface only has one address,
+and, because it's a loopback interface, it's point-to-point and therefore
+has a *peer* address rather than a broadcast address.
+
+Let's look at a more interesting interface.
+
+>>> addrs = netifaces.ifaddresses('en0')
+>>> addrs[netifaces.AF_INET]
+[{'broadcast': '10.15.255.255', 'netmask': '255.240.0.0', 'addr': '10.0.1.4'}, {'broadcast': '192.168.0.255', 'addr': '192.168.0.47'}]
+
+This interface has two addresses (see, I told you...)  Both of them are
+regular IPv4 addresses, although in one case the netmask has been changed
+from its default.  The netmask *may not* appear on your system if it's set
+to the default for the address range.
+
+Because this interface isn't point-to-point, it also has broadcast addresses.
+
+Now, say we want, instead of the IP addresses, to get the MAC address; that
+is, the hardware address of the Ethernet adapter running this interface.  We
+can do
+
+>>> addrs[netifaces.AF_LINK]
+[{'addr': '00:12:34:56:78:9a'}]
+
+Note that this may not be available on platforms without getifaddrs(), unless
+they happen to implement ``SIOCGIFHWADDR``.  Note also that you just get the
+address; it's unlikely that you'll see anything else with an ``AF_LINK`` address.
+Oh, and don't assume that all ``AF_LINK`` addresses are Ethernet; you might, for
+instance, be on a Mac, in which case:
+
+>>> addrs = netifaces.ifaddresses('fw0')
+>>> addrs[netifaces.AF_LINK]
+[{'addr': '00:12:34:56:78:9a:bc:de'}]
+
+No, that isn't an exceptionally long Ethernet MAC address---it's a FireWire
+address.
+
+As of version 0.10.0, you can also obtain a list of gateways on your
+machine:
+
+>>> netifaces.gateways()
+{2: [('10.0.1.1', 'en0', True), ('10.2.1.1', 'en1', False)], 30: [('fe80::1', 'en0', True)], 'default': { 2: ('10.0.1.1', 'en0'), 30: ('fe80::1', 'en0') }}
+
+This dictionary is keyed on address family---in this case, ``AF_INET``---and
+each entry is a list of gateways as ``(address, interface, is_default)`` tuples.
+Notice that here we have two separate gateways for IPv4 (``AF_INET``); some
+operating systems support configurations like this and can either route packets
+based on their source, or based on administratively configured routing tables.
+
+For convenience, we also allow you to index the dictionary with the special
+value ``'default'``, which returns a dictionary mapping address families to the
+default gateway in each case.  Thus you can get the default IPv4 gateway with
+
+>>> gws = netifaces.gateways()
+>>> gws['default'][netifaces.AF_INET]
+('10.0.1.1', 'en0')
+
+Do note that there may be no default gateway for any given address family;
+this is currently very common for IPv6 and much less common for IPv4 but it
+can happen even for ``AF_INET``.
+
+BTW, if you're trying to configure your machine to have multiple gateways for
+the same address family, it's a very good idea to check the documentation for
+your operating system *very* carefully, as some systems become extremely
+confused or route packets in a non-obvious manner.
+
+I'm very interested in hearing from anyone (on any platform) for whom the
+``gateways()`` method doesn't produce the expected results.  It's quite
+complicated extracting this information from the operating system (whichever
+operating system we're talking about), and so I expect there's at least one
+system out there where this just won't work.
+
+3. This is great!  What platforms does it work on?
+--------------------------------------------------
+
+It gets regular testing on OS X, Linux and Windows.  It has also been used
+successfully on Solaris, and it's expected to work properly on other UNIX-like
+systems as well.  If you are running something that is not supported, and
+wish to contribute a patch, please use BitBucket to send a pull request.
+
+4. What license is this under?
+------------------------------
+
+It's an MIT-style license.  Here goes:
+
+Copyright (c) 2007-2014 Alastair Houghton
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+5. Why the jump to 0.10.0?
+--------------------------
+
+Because someone released a fork of netifaces with the version 0.9.0.
+Hopefully skipping the version number should remove any confusion.  In 
+addition starting with 0.10.0 Python 3 is now supported and other 
+features/bugfixes have been included as well.  See the CHANGELOG for a
+more complete list of changes.
+
+

lib/python3.5/site-packages/netifaces-0.10.4.dist-info/METADATA

@@ -0,0 +1,216 @@
+Metadata-Version: 2.0
+Name: netifaces
+Version: 0.10.4
+Summary: Portable network interface information.
+Home-page: https://bitbucket.org/al45tair/netifaces
+Author: Alastair Houghton
+Author-email: alastair@alastairs-place.net
+License: MIT License
+Platform: UNKNOWN
+Classifier: Development Status :: 4 - Beta
+Classifier: Intended Audience :: Developers
+Classifier: License :: OSI Approved :: MIT License
+Classifier: Topic :: System :: Networking
+Classifier: Programming Language :: Python
+Classifier: Programming Language :: Python :: 2
+Classifier: Programming Language :: Python :: 2.5
+Classifier: Programming Language :: Python :: 2.6
+Classifier: Programming Language :: Python :: 2.7
+Classifier: Programming Language :: Python :: 3
+
+netifaces 0.10.4
+================
+
+.. image:: https://drone.io/bitbucket.org/al45tair/netifaces/status.png
+   :target: https://drone.io/bitbucket.org/al45tair/netifaces/latest
+   :alt: Build Status
+
+1. What is this?
+----------------
+
+It's been annoying me for some time that there's no easy way to get the
+address(es) of the machine's network interfaces from Python.  There is
+a good reason for this difficulty, which is that it is virtually impossible
+to do so in a portable manner.  However, it seems to me that there should
+be a package you can easy_install that will take care of working out the
+details of doing so on the machine you're using, then you can get on with
+writing Python code without concerning yourself with the nitty gritty of
+system-dependent low-level networking APIs.
+
+This package attempts to solve that problem.
+
+2. How do I use it?
+-------------------
+
+First you need to install it, which you can do by typing::
+
+  tar xvzf netifaces-0.10.4.tar.gz
+  cd netifaces-0.10.4
+  python setup.py install
+
+Once that's done, you'll need to start Python and do something like the
+following::
+
+>>> import netifaces
+
+Then if you enter
+
+>>> netifaces.interfaces()
+['lo0', 'gif0', 'stf0', 'en0', 'en1', 'fw0']
+
+you'll see the list of interface identifiers for your machine.
+
+You can ask for the addresses of a particular interface by doing
+
+>>> netifaces.ifaddresses('lo0')
+{18: [{'addr': ''}], 2: [{'peer': '127.0.0.1', 'netmask': '255.0.0.0', 'addr': '127.0.0.1'}], 30: [{'peer': '::1', 'netmask': 'ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff', 'addr': '::1'}, {'peer': '', 'netmask': 'ffff:ffff:ffff:ffff::', 'addr': 'fe80::1%lo0'}]}
+
+Hmmmm.  That result looks a bit cryptic; let's break it apart and explain
+what each piece means.  It returned a dictionary, so let's look there first::
+
+  { 18: [...], 2: [...], 30: [...] }
+
+Each of the numbers refers to a particular address family.  In this case, we
+have three address families listed; on my system, 18 is ``AF_LINK`` (which means
+the link layer interface, e.g. Ethernet), 2 is ``AF_INET`` (normal Internet
+addresses), and 30 is ``AF_INET6`` (IPv6).
+
+But wait!  Don't use these numbers in your code.  The numeric values here are
+system dependent; fortunately, I thought of that when writing netifaces, so
+the module declares a range of values that you might need.  e.g.
+
+>>> netifaces.AF_LINK
+18
+
+Again, on your system, the number may be different.
+
+So, what we've established is that the dictionary that's returned has one
+entry for each address family for which this interface has an address.  Let's
+take a look at the ``AF_INET`` addresses now:
+
+>>> addrs = netifaces.ifaddresses('lo0')
+>>> addrs[netifaces.AF_INET]
+[{'peer': '127.0.0.1', 'netmask': '255.0.0.0', 'addr': '127.0.0.1'}]
+
+You might be wondering why this value is a list.  The reason is that it's
+possible for an interface to have more than one address, even within the
+same family.  I'll say that again: *you can have more than one address of
+the same type associated with each interface*.
+
+*Asking for "the" address of a particular interface doesn't make sense.*
+
+Right, so, we can see that this particular interface only has one address,
+and, because it's a loopback interface, it's point-to-point and therefore
+has a *peer* address rather than a broadcast address.
+
+Let's look at a more interesting interface.
+
+>>> addrs = netifaces.ifaddresses('en0')
+>>> addrs[netifaces.AF_INET]
+[{'broadcast': '10.15.255.255', 'netmask': '255.240.0.0', 'addr': '10.0.1.4'}, {'broadcast': '192.168.0.255', 'addr': '192.168.0.47'}]
+
+This interface has two addresses (see, I told you...)  Both of them are
+regular IPv4 addresses, although in one case the netmask has been changed
+from its default.  The netmask *may not* appear on your system if it's set
+to the default for the address range.
+
+Because this interface isn't point-to-point, it also has broadcast addresses.
+
+Now, say we want, instead of the IP addresses, to get the MAC address; that
+is, the hardware address of the Ethernet adapter running this interface.  We
+can do
+
+>>> addrs[netifaces.AF_LINK]
+[{'addr': '00:12:34:56:78:9a'}]
+
+Note that this may not be available on platforms without getifaddrs(), unless
+they happen to implement ``SIOCGIFHWADDR``.  Note also that you just get the
+address; it's unlikely that you'll see anything else with an ``AF_LINK`` address.
+Oh, and don't assume that all ``AF_LINK`` addresses are Ethernet; you might, for
+instance, be on a Mac, in which case:
+
+>>> addrs = netifaces.ifaddresses('fw0')
+>>> addrs[netifaces.AF_LINK]
+[{'addr': '00:12:34:56:78:9a:bc:de'}]
+
+No, that isn't an exceptionally long Ethernet MAC address---it's a FireWire
+address.
+
+As of version 0.10.0, you can also obtain a list of gateways on your
+machine:
+
+>>> netifaces.gateways()
+{2: [('10.0.1.1', 'en0', True), ('10.2.1.1', 'en1', False)], 30: [('fe80::1', 'en0', True)], 'default': { 2: ('10.0.1.1', 'en0'), 30: ('fe80::1', 'en0') }}
+
+This dictionary is keyed on address family---in this case, ``AF_INET``---and
+each entry is a list of gateways as ``(address, interface, is_default)`` tuples.
+Notice that here we have two separate gateways for IPv4 (``AF_INET``); some
+operating systems support configurations like this and can either route packets
+based on their source, or based on administratively configured routing tables.
+
+For convenience, we also allow you to index the dictionary with the special
+value ``'default'``, which returns a dictionary mapping address families to the
+default gateway in each case.  Thus you can get the default IPv4 gateway with
+
+>>> gws = netifaces.gateways()
+>>> gws['default'][netifaces.AF_INET]
+('10.0.1.1', 'en0')
+
+Do note that there may be no default gateway for any given address family;
+this is currently very common for IPv6 and much less common for IPv4 but it
+can happen even for ``AF_INET``.
+
+BTW, if you're trying to configure your machine to have multiple gateways for
+the same address family, it's a very good idea to check the documentation for
+your operating system *very* carefully, as some systems become extremely
+confused or route packets in a non-obvious manner.
+
+I'm very interested in hearing from anyone (on any platform) for whom the
+``gateways()`` method doesn't produce the expected results.  It's quite
+complicated extracting this information from the operating system (whichever
+operating system we're talking about), and so I expect there's at least one
+system out there where this just won't work.
+
+3. This is great!  What platforms does it work on?
+--------------------------------------------------
+
+It gets regular testing on OS X, Linux and Windows.  It has also been used
+successfully on Solaris, and it's expected to work properly on other UNIX-like
+systems as well.  If you are running something that is not supported, and
+wish to contribute a patch, please use BitBucket to send a pull request.
+
+4. What license is this under?
+------------------------------
+
+It's an MIT-style license.  Here goes:
+
+Copyright (c) 2007-2014 Alastair Houghton
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+5. Why the jump to 0.10.0?
+--------------------------
+
+Because someone released a fork of netifaces with the version 0.9.0.
+Hopefully skipping the version number should remove any confusion.  In 
+addition starting with 0.10.0 Python 3 is now supported and other 
+features/bugfixes have been included as well.  See the CHANGELOG for a
+more complete list of changes.
+
+

lib/python3.5/site-packages/netifaces-0.10.4.dist-info/RECORD

@@ -0,0 +1,8 @@
+netifaces.cpython-35m-darwin.so,sha256=0wFmL6w7IJjAmcESMkOUGuF0nAsIR3aFw7RE9YeSakg,20080
+netifaces-0.10.4.dist-info/DESCRIPTION.rst,sha256=EyJf6yFbUVkw5TpZ0M61ZeVbtCZdHYAqSdfTXT4lo6w,8397
+netifaces-0.10.4.dist-info/METADATA,sha256=nrFMGFClFWGJIsVo8nC9bLS6iermD9vl6cCQS56eG50,9130
+netifaces-0.10.4.dist-info/RECORD,,
+netifaces-0.10.4.dist-info/WHEEL,sha256=Er7DBTU_C2g_rTGCxcwhCKegQSKoYLj1ncusWiwlKwM,111
+netifaces-0.10.4.dist-info/metadata.json,sha256=fdQ1l7Ph7jJLiRxhSysUZf_SqAbqnByXtHrZ3fm8efs,846
+netifaces-0.10.4.dist-info/top_level.txt,sha256=PqMTaIuWtSjkdQHX6lH1Lmpv2aqBUYAGqATB8z3A6TQ,10
+netifaces-0.10.4.dist-info/zip-safe,sha256=AbpHGcgLb-kRsJGnwFEktk7uzpZOCcBY74-YBdrKVGs,1

lib/python3.5/site-packages/netifaces-0.10.4.dist-info/WHEEL

@@ -0,0 +1,5 @@
+Wheel-Version: 1.0
+Generator: bdist_wheel (0.26.0)
+Root-Is-Purelib: false
+Tag: cp35-cp35m-macosx_10_11_x86_64
+

lib/python3.5/site-packages/netifaces-0.10.4.dist-info/metadata.json

@@ -0,0 +1 @@
+{"generator": "bdist_wheel (0.26.0)", "summary": "Portable network interface information.", "classifiers": ["Development Status :: 4 - Beta", "Intended Audience :: Developers", "License :: OSI Approved :: MIT License", "Topic :: System :: Networking", "Programming Language :: Python", "Programming Language :: Python :: 2", "Programming Language :: Python :: 2.5", "Programming Language :: Python :: 2.6", "Programming Language :: Python :: 2.7", "Programming Language :: Python :: 3"], "extensions": {"python.details": {"project_urls": {"Home": "https://bitbucket.org/al45tair/netifaces"}, "contacts": [{"email": "alastair@alastairs-place.net", "name": "Alastair Houghton", "role": "author"}], "document_names": {"description": "DESCRIPTION.rst"}}}, "license": "MIT License", "metadata_version": "2.0", "name": "netifaces", "version": "0.10.4"}

lib/python3.5/site-packages/netifaces-0.10.4.dist-info/top_level.txt

@@ -0,0 +1 @@
+netifaces

lib/python3.5/site-packages/netifaces-0.10.4.dist-info/zip-safe

@@ -0,0 +1 @@
+